NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
HF-2-30
Model HF-2-30 1.5-30MHz Unity Gain Download Datasheet Download Manual Post Enquiry

HF Broadband Military Antenna

Design Features: The HF-2-30 Broad Band Folded Dipole Antenna offer optimum performance, fully automatic, low SWR operation over the entire HF band 1.5 – 30 MHz and suitable for transmitting, receiving or HF spectrum monitoring or surveillance. The HF broadband dipole antenna propagates NVIS, local, medium or long distance. This HF broadband dipole antenna is ready to go right out of the box, no taps to change frequency, nothing to tune - ever! Designed for the military and built to last. The HF-2-30 can work any frequency you want without going through a lot of knob twirling and measurements to get a good VSWR match - just set your frequency and go!

Constructions: The HF broadband antenna is designed by using two folded arms with a matching Balun. The HF broadband dipole antenna can be mounted either in an inverted “V” using a single mast, or in a standard dipole configuration (Horizontal Polarized) using two masts. The HF Broad Band Dipole Antenna provides optimum performance over complete HF band, eliminating the requirement of multiple antennas or an Antenna Tuning Unit.

Electrical Specifications:
Frequency Range 1.5 - 30 MHz.
Gain Unity
Bandwidth 1.5 - 30 MHz.
Antenna Type 2 Wire
Polarization Horizontal or Inverted
Input Impedance 50 Ohms.
Radiation Pattern Omni
VSWR - Equal To or Better Then 2 : 1
RF Power Handling Capacity 500 Watts.
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Weight 4 Kgs.
Wind Rating 160 Km/Hr.
Base Dia 65 mm (Balun)
Base Material Nylon (Balun)
Overall Length 23 Meters.
Shipping Length 1 Meter
Dipole Material Twisted Copper with Insulator
Spreaders Material uPVC Pipe
Insulator Material Nylon
Recommended Mast Height 9 Meters (30 Feet)
Distance between Mast 25 Meters

Environmental Specifications:
Operating Temperature (-)25 to +65 Degree Celsius
Storage Temperature (-)40 to +75 Degree Celsius
Humidity 0 to 95% RH

HF Broadband Military Antenna

Model Frequency Gain Download PDF ENQ
HF-2-30 1.5-30MHz Unity Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The HF-2-30 Broad Band Folded Dipole Antenna offer optimum performance, fully automatic, low SWR operation over the entire HF band 1.5 – 30 MHz and suitable for transmitting, receiving or HF spectrum monitoring or surveillance. The HF broadband dipole antenna propagates NVIS, local, medium or long distance. This HF broadband dipole antenna is ready to go right out of the box, no taps to change frequency, nothing to tune - ever! Designed for the military and built to last. The HF-2-30 can work any frequency you want without going through a lot of knob twirling and measurements to get a good VSWR match - just set your frequency and go!

Constructions: The HF broadband antenna is designed by using two folded arms with a matching Balun. The HF broadband dipole antenna can be mounted either in an inverted “V” using a single mast, or in a standard dipole configuration (Horizontal Polarized) using two masts. The HF Broad Band Dipole Antenna provides optimum performance over complete HF band, eliminating the requirement of multiple antennas or an Antenna Tuning Unit.

Electrical Specifications:
Frequency Range 1.5 - 30 MHz.
Gain Unity
Bandwidth 1.5 - 30 MHz.
Antenna Type 2 Wire
Polarization Horizontal or Inverted
Input Impedance 50 Ohms.
Radiation Pattern Omni
VSWR - Equal To or Better Then 2 : 1
RF Power Handling Capacity 500 Watts.
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Weight 4 Kgs.
Wind Rating 160 Km/Hr.
Base Dia 65 mm (Balun)
Base Material Nylon (Balun)
Overall Length 23 Meters.
Shipping Length 1 Meter
Dipole Material Twisted Copper with Insulator
Spreaders Material uPVC Pipe
Insulator Material Nylon
Recommended Mast Height 9 Meters (30 Feet)
Distance between Mast 25 Meters

Environmental Specifications:
Operating Temperature (-)25 to +65 Degree Celsius
Storage Temperature (-)40 to +75 Degree Celsius
Humidity 0 to 95% RH