NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
LP-170-860
Model LP-170-860 170-860MHz 9 dBi Gain Download Datasheet Download Manual Post Enquiry

High Gain Log PeriodicAntenna

Design Features: The LP-170-860 log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and designed to provide wideband directional radio signals from 170 to 860 MHz frequency band. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for analogue terrestrial television transmissions and receptions application. This high gain LPA provides strong performance over the entire frequency of 170-860 MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas

Constructions: The LP-170-860 assembled log periodic antennas outer-most dimensions are 1.5 meters (5 feet) long and 0.9 meters (3 feet) wide. The antenna has removable elements, the longest of which is 0.45 meter. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment studs system at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range 170-860 MHz
Gain 9 dBi
Bandwidth 170-860MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 60 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then 1:2.5
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km//Hr.
Overall Length 1.50 Meters
Shipping Length 1.55 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Maximum Mount Pipe Diameter 52mm (2 Inches)
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to + 70 Degrees Celsius
Storage Temperature (-)40 to + 80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Log PeriodicAntenna

Model Frequency Gain Download PDF ENQ
LP-170-860 170-860MHz 9 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The LP-170-860 log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and designed to provide wideband directional radio signals from 170 to 860 MHz frequency band. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for analogue terrestrial television transmissions and receptions application. This high gain LPA provides strong performance over the entire frequency of 170-860 MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas

Constructions: The LP-170-860 assembled log periodic antennas outer-most dimensions are 1.5 meters (5 feet) long and 0.9 meters (3 feet) wide. The antenna has removable elements, the longest of which is 0.45 meter. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment studs system at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range 170-860 MHz
Gain 9 dBi
Bandwidth 170-860MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 60 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then 1:2.5
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km//Hr.
Overall Length 1.50 Meters
Shipping Length 1.55 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Maximum Mount Pipe Diameter 52mm (2 Inches)
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to + 70 Degrees Celsius
Storage Temperature (-)40 to + 80 Degrees Celsius
Humidity 0 to 95% RH