NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AQY-150

AQY-150

  2. High Gain Quad Stacked Yagi Antenna
  3. AQY-150
Model AQY-150 136-174MHz 17 dBi. Gain Download Datasheet Download Manual Post Enquiry

High Gain Quad StackedYagi Antenna

Design Features: AQY-150 rugged, all weather VHF high band Quad Stacked Yagi Array is designed for Linear Polarization. The Quad Stacked Yagi Array when packed, comes with elements removed from the antenna boom for ease of packing and transportation. This quad yagi antenna is supplied with phasing harness cable and stacking pipe.

Constructions: The Quad Stacked Yagi Array uses a gamma matching feed, eliminating the use of folded dipole. The antenna termination uses N-Female connector fixed on the antenna dipole.The mounting hardware supplied is of Stainless Steel. The quad yagi array can be stacked horizontally, vertically or square configration by mounting the antenna on the square of a corner, to obtained the desired beamwidth.
 

Electrical Specifications:
Frequency Range 136 - 174 MHz
Gain 17 dBi.
Bandwidth 4 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 22 Degrees ( Horizontal Stacked x 2 )
Front to Back Ratio 22 dB.
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 25 Kgs.
Wind Rating 190 Km/Hr.
Overall Length 2 Meters
Shipping Length 2.2 Meters.
Support Boom
- Materials
- Cross Section
- Outer Diameter.
Aluminum
Square
25 mm
Elements
- Materials
- Cross Section
- Outer Diameter.
Aluminum
Round
19 mm
No. of Yagi Boom 4
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Quad StackedYagi Antenna

Model Frequency Gain Download PDF ENQ
AQY-150 136-174MHz 17 dBi. Gain
 
Back
MANDATORY INFORMATION
Optional INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: AQY-150 rugged, all weather VHF high band Quad Stacked Yagi Array is designed for Linear Polarization. The Quad Stacked Yagi Array when packed, comes with elements removed from the antenna boom for ease of packing and transportation. This quad yagi antenna is supplied with phasing harness cable and stacking pipe.

Constructions: The Quad Stacked Yagi Array uses a gamma matching feed, eliminating the use of folded dipole. The antenna termination uses N-Female connector fixed on the antenna dipole.The mounting hardware supplied is of Stainless Steel. The quad yagi array can be stacked horizontally, vertically or square configration by mounting the antenna on the square of a corner, to obtained the desired beamwidth.
 

Electrical Specifications:
Frequency Range 136 - 174 MHz
Gain 17 dBi.
Bandwidth 4 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 22 Degrees ( Horizontal Stacked x 2 )
Front to Back Ratio 22 dB.
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 25 Kgs.
Wind Rating 190 Km/Hr.
Overall Length 2 Meters
Shipping Length 2.2 Meters.
Support Boom
- Materials
- Cross Section
- Outer Diameter.
Aluminum
Square
25 mm
Elements
- Materials
- Cross Section
- Outer Diameter.
Aluminum
Round
19 mm
No. of Yagi Boom 4
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH