NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
SAT-225-400CL
Model SAT-225-400CL 225-400MHz 6dBic & 3dBil Gain Download Datasheet Download Manual Post Enquiry

SATCOM Ground Station Antenna

antenna which is ideal for SATCOM On-The-Move (SOTM) operation. The line of sight antenna is used for communicating with satellites low on the horizon. SAT-225-400CL can be used with most tactical Multi-Band, Multi-Mode Receivers (MBMMR), as well as all airborne and ground transceivers that accept 50 ohm antenna impedance.

The Antenna can be connected to two radios to provide two simultaneous SATCOM – Satellite high angle coverage and standard LOS - Line-Of-Sight low angle air-to-air or air-to-ground communications.

SAT-225-400CL antenna combines the features of a two-port dual function high angle (RHCP) and low angle (Linear - Vertical) antenna system that is suitable for installation on vehicular, shipboard and ground shelter applications. No diplexer or switching is required.

Electrical Specifications:
Frequency Range 225-400 MHz.
Gain 6dBic & 3dBil
Bandwidth 225-400MHz
Polarization RHCP & Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni
VSWR - Equal To or Better Then 1:2 & 1:3
RF Power Handling Capacity 200 Watts & 100 Watts
Input Termination N-Female & TNC-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 180 Km/Hr.
Overall Length 600 mm
Gross Weight 3.5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

SATCOM Ground Station Antenna

Model Frequency Gain Download PDF ENQ
SAT-225-400CL 225-400MHz 6dBic & 3dBil Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

antenna which is ideal for SATCOM On-The-Move (SOTM) operation. The line of sight antenna is used for communicating with satellites low on the horizon. SAT-225-400CL can be used with most tactical Multi-Band, Multi-Mode Receivers (MBMMR), as well as all airborne and ground transceivers that accept 50 ohm antenna impedance.

The Antenna can be connected to two radios to provide two simultaneous SATCOM – Satellite high angle coverage and standard LOS - Line-Of-Sight low angle air-to-air or air-to-ground communications.

SAT-225-400CL antenna combines the features of a two-port dual function high angle (RHCP) and low angle (Linear - Vertical) antenna system that is suitable for installation on vehicular, shipboard and ground shelter applications. No diplexer or switching is required.

Electrical Specifications:
Frequency Range 225-400 MHz.
Gain 6dBic & 3dBil
Bandwidth 225-400MHz
Polarization RHCP & Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni
VSWR - Equal To or Better Then 1:2 & 1:3
RF Power Handling Capacity 200 Watts & 100 Watts
Input Termination N-Female & TNC-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 180 Km/Hr.
Overall Length 600 mm
Gross Weight 3.5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH