NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AP-145016

AP-145016

  2. Grid Parabolic Antenna
  3. AP-145016
Model AP-145016 1300-1600MHz 16 dBi. Gain Download Datasheet Download Manual Post Enquiry

Grid Parabolic Antenna

Design Features: The AP-145016 grid parabolic antenna consists of full Parabolic reflector having a diameter of 0.6 Meter for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145016 grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range 1300-1600 MHz
Gain 16 dBi.
Bandwidth 150 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Beamwidth -3dB. 24 Degrees
Front to Back Ratio 23 dB.
VSWR - Equal To or Better Then 1.5 : 1
RF Power Handling Capacity 250 Watts.
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 6 Kgs.
Wind Rating 200 Km/Hr
Support Pipe O.D. 12.7 mm (1/2 Inch)
Support Pipe Material Aluminum
Diameter of Parabolic Reflector 0.6 Meter
Radiating Material Brass
Grid Members Material Aluminum Strips - 1/2 Inch
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Grid Parabolic Antenna

Model Frequency Gain Download PDF ENQ
AP-145016 1300-1600MHz 16 dBi. Gain
 
Back
MANDATORY INFORMATION
Optional INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AP-145016 grid parabolic antenna consists of full Parabolic reflector having a diameter of 0.6 Meter for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145016 grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range 1300-1600 MHz
Gain 16 dBi.
Bandwidth 150 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Beamwidth -3dB. 24 Degrees
Front to Back Ratio 23 dB.
VSWR - Equal To or Better Then 1.5 : 1
RF Power Handling Capacity 250 Watts.
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 6 Kgs.
Wind Rating 200 Km/Hr
Support Pipe O.D. 12.7 mm (1/2 Inch)
Support Pipe Material Aluminum
Diameter of Parabolic Reflector 0.6 Meter
Radiating Material Brass
Grid Members Material Aluminum Strips - 1/2 Inch
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH