NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AP-145030

AP-145030

  2. Grid Parabolic Antenna
  3. AP-145030
Model AP-145030 1300-1600MHz 30 dBi. Gain Download Datasheet Download Manual Post Enquiry

Grid Parabolic Antenna

Design Features: The AP-145030 grid parabolic antenna consists of full Parabolic reflector having a diameter of 3 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145030 grid parabolic antenna is supplied with azimuth and elevation tracking mechanism where the fine adjustments is necessary to optimized the signal strength of a radio link along with Two side struts to provide extra supports to the antenna.

Electrical Specifications:
Frequency Range 1300-1600 MHz
Gain 30 dBi.
Bandwidth 150 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Beamwidth -3dB. 4.8 Degrees.
Front to Back Ratio 38 dB.
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 250 Watts.
Input Termination N-Female.
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 115 Kgs.
Wind Rating 195 Km/Hr.
Support Pipe O.D. 76 mm (3 Inch)
Support Pipe Material Aluminum
Diameter of Parabolic Reflector 3.0 Meters
Radiating Material Brass
Grid Members Material Aluminum Tube - 5/8 Inch
Maximum Mount Pipe Diameter 115 mm (4.5 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Grid Parabolic Antenna

Model Frequency Gain Download PDF ENQ
AP-145030 1300-1600MHz 30 dBi. Gain
 
Back
MANDATORY INFORMATION
Optional INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AP-145030 grid parabolic antenna consists of full Parabolic reflector having a diameter of 3 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145030 grid parabolic antenna is supplied with azimuth and elevation tracking mechanism where the fine adjustments is necessary to optimized the signal strength of a radio link along with Two side struts to provide extra supports to the antenna.

Electrical Specifications:
Frequency Range 1300-1600 MHz
Gain 30 dBi.
Bandwidth 150 MHz.
Polarization Vertical or Horizontal
Input Impedance 50 Ohms.
Radiation Pattern Directional
Beamwidth -3dB. 4.8 Degrees.
Front to Back Ratio 38 dB.
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 250 Watts.
Input Termination N-Female.
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 115 Kgs.
Wind Rating 195 Km/Hr.
Support Pipe O.D. 76 mm (3 Inch)
Support Pipe Material Aluminum
Diameter of Parabolic Reflector 3.0 Meters
Radiating Material Brass
Grid Members Material Aluminum Tube - 5/8 Inch
Maximum Mount Pipe Diameter 115 mm (4.5 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH