Name: AP-240030 Grid Parabolic Antenna | Antenna Experts
Brand: Grid Parabolic Antenna
SKU: AP-240030
Availability: InStock
Rating: 4.4 (135 reviews)

Model AP-240030

2300-2600MHz

30 dBi. Gain

Grid Parabolic Antenna

Design Features: The AP-240030 grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.8 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-240030 grid parabolic antenna is supplied with azimuth and elevation tracking mechanism where the fine adjustments is necessary to optimized the signal strength of a radio.

Electrical Specifications:
Frequency Range	2300-2600 MHz
Gain	30 dBi.
Bandwidth	200 MHz.
Polarization	Vertical or Horizontal
Input Impedance	50 Ohms.
Radiation Pattern	Directional
Beamwidth -3dB.	4.5 Degrees
Front to Back Ratio	30 dB.
VSWR - Equal To or Better Then	1.3 : 1
RF Power Handling Capacity	250 watts.
Input Termination	N-Female
Lightning Protection	Direct Ground

Mechanical Specifications:
Antenna Materials	All Aluminum
Mounting Hardware -Materials	Stainless Steel
Wind Rating	200 Km/Hr.
Support Pipe O.D.	38 mm (1.5 Inches)
Support Pipe Material	Aluminum
Diameter of Parabolic Reflector	1.8 Meters
Radiating Material	Brass
Grid Members Material	Aluminum Tube - 1/2 Inch
Maximum Mount Pipe Diameter	115 mm ( 4 Inches.)
Gross Weight	36 Kgs.

Environmental Specifications:
Operating Temperature	(-)30 to +70 Degrees Celcius
Storage Temperature	(-)40 to +80 Degrees Celcius
Humidity	0 to 95% RH

Grid Parabolic Antenna

Model	Frequency	Gain	Download	PDF	ENQ
AP-240030	2300-2600MHz	30 dBi. Gain

Back

MANDATORY INFORMATION

First Name *

Last Name *

Contact Number *

Email ID *

Model Number *

Subject *

Message

Designation

Company

Address

City

Pin Code

State

Country

Cell

Fax

NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Electrical Specifications:
Frequency Range	2300-2600 MHz
Gain	30 dBi.
Bandwidth	200 MHz.
Polarization	Vertical or Horizontal
Input Impedance	50 Ohms.
Radiation Pattern	Directional
Beamwidth -3dB.	4.5 Degrees
Front to Back Ratio	30 dB.
VSWR - Equal To or Better Then	1.3 : 1
RF Power Handling Capacity	250 watts.
Input Termination	N-Female
Lightning Protection	Direct Ground

Mechanical Specifications:
Antenna Materials	All Aluminum
Mounting Hardware -Materials	Stainless Steel
Wind Rating	200 Km/Hr.
Support Pipe O.D.	38 mm (1.5 Inches)
Support Pipe Material	Aluminum
Diameter of Parabolic Reflector	1.8 Meters
Radiating Material	Brass
Grid Members Material	Aluminum Tube - 1/2 Inch
Maximum Mount Pipe Diameter	115 mm ( 4 Inches.)
Gross Weight	36 Kgs.

Environmental Specifications:
Operating Temperature	(-)30 to +70 Degrees Celcius
Storage Temperature	(-)40 to +80 Degrees Celcius
Humidity	0 to 95% RH

AP-240030

Grid Parabolic Antenna

Grid Parabolic Antenna

MANDATORY INFORMATION

Optional INFORMATION