NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
HFCM-4-24
Model HFCM-4-24 4-24MHz 5 dBi Gain Download Datasheet Download Manual Post Enquiry

HF Broadband Military Antenna

HF Broadband Vertical Conical Monopole Omnidirectional Antenna, 4-24MHz, 5dBi Gain

The HFCM-4-24 conical monopole antenna is an excellent choice for omnidirectional HF communications where both ground wave and sky wave coverage are required. The electrical performance of HFCM-4-24 HF conical monopole antenna is nearly similar to the theoretical performance. Due to its large diameter/height ratio the HF vertical conical monopole has excellent VSWR and pattern performance over a very wide frequency range, as compared to other conical monopoles manufacturers. HF vertical conical monopole antenna operates at full efficiency over the 4-24 MHz bands.

The true wideband capabilities of the HF conical monopole are achieved with full radiation efficiency. The HFCM-4-24 HF conical monopole antenna uses no tuners, no special coupling units, no terminations, no resistors to achieve its high bandwidth, nor does these uses any techniques or devices to couple RF energy to the ground, an approach sometimes used to increase bandwidth. The HFCM-4-24 HF vertical conical monopole is the simplest and safest antennas to erect in its class. The structure of HF conical monopoles above 10 MHz is fully stable during the rigging sequence, with guys. Once erected, the HFCM-4-24 HF monopoles antennas have outstanding structural rigidity, troublesome deflections and mechanical oscillations do not occur.

All HFCM-4-24 HF conical monopole antenna uses high quality, exhaustively tested components and materials. All radiators are of Alumoweld, a wire composed of a high-strength steel core and a highly conductive, corrosion-resistant coating of aluminum. All insulators are made of high-strength DELRIN, a material with an extremely low loss tangent that is virtually impervious to the effects of UV and salt spray. All nuts, bolts, split washers and fasteners are made of marine grade stainless steel. Dissimilar metal contacts are avoided to the extent possible, and where they are used, measures are taken to prevent corrosion.

A working life of 20 years or more is standard with the HFCM series HF vertical conical monopole antennas. All the HF conical monopoles antennas are supplied in kit form dismantle condition with all required materials including the mast, guys, curtain, ground screen (earth mat) and foundation hardware.

Electrical Specifications:
Frequency Range 4-24 MHz
Gain 5 dBi
Bandwidth 4-24MHz
Antenna Type Conical
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 3:1
RF Power Handling Capacity 1 KW with N-F, 10KW with 1-5/8” EIA
Input Termination N-Female or DIN-Female or 1-5/8” EIA

Mechanical Specifications:
Antenna Materials Aluminum & Stainless Steel
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 15 Meters
Shipping Length 3.0 Meters
Radiating Material Ultra Corrosion Resistant Stainless Steel
Gross Weight 100 Kgs

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

HF Broadband Military Antenna

Model Frequency Gain Download PDF ENQ
HFCM-4-24 4-24MHz 5 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

HF Broadband Vertical Conical Monopole Omnidirectional Antenna, 4-24MHz, 5dBi Gain

The HFCM-4-24 conical monopole antenna is an excellent choice for omnidirectional HF communications where both ground wave and sky wave coverage are required. The electrical performance of HFCM-4-24 HF conical monopole antenna is nearly similar to the theoretical performance. Due to its large diameter/height ratio the HF vertical conical monopole has excellent VSWR and pattern performance over a very wide frequency range, as compared to other conical monopoles manufacturers. HF vertical conical monopole antenna operates at full efficiency over the 4-24 MHz bands.

The true wideband capabilities of the HF conical monopole are achieved with full radiation efficiency. The HFCM-4-24 HF conical monopole antenna uses no tuners, no special coupling units, no terminations, no resistors to achieve its high bandwidth, nor does these uses any techniques or devices to couple RF energy to the ground, an approach sometimes used to increase bandwidth. The HFCM-4-24 HF vertical conical monopole is the simplest and safest antennas to erect in its class. The structure of HF conical monopoles above 10 MHz is fully stable during the rigging sequence, with guys. Once erected, the HFCM-4-24 HF monopoles antennas have outstanding structural rigidity, troublesome deflections and mechanical oscillations do not occur.

All HFCM-4-24 HF conical monopole antenna uses high quality, exhaustively tested components and materials. All radiators are of Alumoweld, a wire composed of a high-strength steel core and a highly conductive, corrosion-resistant coating of aluminum. All insulators are made of high-strength DELRIN, a material with an extremely low loss tangent that is virtually impervious to the effects of UV and salt spray. All nuts, bolts, split washers and fasteners are made of marine grade stainless steel. Dissimilar metal contacts are avoided to the extent possible, and where they are used, measures are taken to prevent corrosion.

A working life of 20 years or more is standard with the HFCM series HF vertical conical monopole antennas. All the HF conical monopoles antennas are supplied in kit form dismantle condition with all required materials including the mast, guys, curtain, ground screen (earth mat) and foundation hardware.

Electrical Specifications:
Frequency Range 4-24 MHz
Gain 5 dBi
Bandwidth 4-24MHz
Antenna Type Conical
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 3:1
RF Power Handling Capacity 1 KW with N-F, 10KW with 1-5/8” EIA
Input Termination N-Female or DIN-Female or 1-5/8” EIA

Mechanical Specifications:
Antenna Materials Aluminum & Stainless Steel
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 15 Meters
Shipping Length 3.0 Meters
Radiating Material Ultra Corrosion Resistant Stainless Steel
Gross Weight 100 Kgs

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH