NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
HFW-230-36
Model HFW-230-36 1.5-30MHz Unity Gain Download Datasheet Download Manual Post Enquiry

HF Broadband Military Antenna

HF Broadband Vertical Whip Antenna for Ground Station or Shipboard Deck Mount Application

The HFW-230-36 is a 36 feet long, broadband HF tactical whip antenna intended for use in high power electronic counter measure systems. The HFW is designed to operates in the 1.6 MHz to 30 MHz range with 1000 watts average power handling capacity The HFW-230-36 HF whip antenna is ideally suited for military shipboard use, as well as for fixed stations. Consisting of three section, heavy duty, military-grade aluminium whip antenna; it has a power rating of 1000 watts over the entire 2 to 30 MHz spectrum. It is supported by an integral mounting flange. The HFW-230-36 HF Whip antenna is made of 6063T6 ultra corrosion resistant architectural anodized aluminuim alloy, and does not require any field tuning. The overall length of HF Whip antenna HFW-230-36 is 36 feet long consisting of 3 sections. The antenna has M-10 stud is fixed at the lower section of antenna near mounting fixture/flange. The antenna provides low-angle gain in the vertical plane and omnidirection in the horizontal plane; the radiated energy is vertically polarized. The antenna need ATU for it operation which is not in the scope of antenna manufacture.

Complete Technical Datasheet of this product in .pdf format is only available for registered users. For registration please contact our Technical Support Team at ts@antennaexperts.in

Please refer to the Antenna Experts - Privacy Policy for our commitment regarding this information and our non-disclosure policy.

Electrical Specifications:
Frequency Range 1.6-30 MHz
Gain Unity
Bandwidth 1.6-30 MHz
Antenna Type Vertical Whip
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omnidirectional
VSWR - Equal To or Better Then 2.5:1
RF Power Handling Capacity 500 watts
Input Termination N Female or DIN Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 150 Km/Hr
Overall Length 36 Feet
Radiating Material Aluminum Alloy
Gross Weight 35 Kgs

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

HF Broadband Military Antenna

Model Frequency Gain Download PDF ENQ
HFW-230-36 1.5-30MHz Unity Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

HF Broadband Vertical Whip Antenna for Ground Station or Shipboard Deck Mount Application

The HFW-230-36 is a 36 feet long, broadband HF tactical whip antenna intended for use in high power electronic counter measure systems. The HFW is designed to operates in the 1.6 MHz to 30 MHz range with 1000 watts average power handling capacity The HFW-230-36 HF whip antenna is ideally suited for military shipboard use, as well as for fixed stations. Consisting of three section, heavy duty, military-grade aluminium whip antenna; it has a power rating of 1000 watts over the entire 2 to 30 MHz spectrum. It is supported by an integral mounting flange. The HFW-230-36 HF Whip antenna is made of 6063T6 ultra corrosion resistant architectural anodized aluminuim alloy, and does not require any field tuning. The overall length of HF Whip antenna HFW-230-36 is 36 feet long consisting of 3 sections. The antenna has M-10 stud is fixed at the lower section of antenna near mounting fixture/flange. The antenna provides low-angle gain in the vertical plane and omnidirection in the horizontal plane; the radiated energy is vertically polarized. The antenna need ATU for it operation which is not in the scope of antenna manufacture.

Complete Technical Datasheet of this product in .pdf format is only available for registered users. For registration please contact our Technical Support Team at ts@antennaexperts.in

Please refer to the Antenna Experts - Privacy Policy for our commitment regarding this information and our non-disclosure policy.

Electrical Specifications:
Frequency Range 1.6-30 MHz
Gain Unity
Bandwidth 1.6-30 MHz
Antenna Type Vertical Whip
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omnidirectional
VSWR - Equal To or Better Then 2.5:1
RF Power Handling Capacity 500 watts
Input Termination N Female or DIN Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 150 Km/Hr
Overall Length 36 Feet
Radiating Material Aluminum Alloy
Gross Weight 35 Kgs

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH