NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
TPA-1060
Model TPA-1060 1030-1090MHz 2.14 dBi. Gain Download Datasheet Download Manual Post Enquiry

High Gain DME Antenna

beryllium copper with chromium finish and does not require any field tuning or adjustments. This transponder antenna is an Omni-directional broadband, higher performance, quarter wave top loaded stub monopole type antenna designed specifically for use in aircraft for transponder application. The antenna does not use any junction to prevent RF inter-modulation and is completely protected within a high-tech ruggedized fiber glass radome to ensure survivability in the worst environments. The compact size of transponder antenna allows easy handling and shipping.

Constructions: Antenna radiator is mechanically captivated and is machined from solid brass for impact resistance. Contact points are made from beryllium copper with gold finish. Metallic parts are plated with bright chromium for corrosion protection. A single 0.625” (16mm) diameter hole is required to mount the antenna. This transponder antenna is a center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special top loaded quarter wave stub monopole matching is used for smooth VSWR and constant gain over the entire frequency band. The antenna termination is enclosed at bottom of the antenna for complete weather protection.

Electrical Specifications:
Frequency Range 1030-1090 MHz
Gain 2.14 dBi.
Bandwidth Entire Band
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omnidirectional
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 1000 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Chromium Plated Brass
Wind Rating 300 Knots TAS
Overall Length 100 mm
Shipping Length 120 mm
Radome Material UV Resistant ABS
Radome Outer Diameter 19 mm
Radome Length 75 mm
Gross Weight 300 Grams

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 100% RH

High Gain DME Antenna

Model Frequency Gain Download PDF ENQ
TPA-1060 1030-1090MHz 2.14 dBi. Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

beryllium copper with chromium finish and does not require any field tuning or adjustments. This transponder antenna is an Omni-directional broadband, higher performance, quarter wave top loaded stub monopole type antenna designed specifically for use in aircraft for transponder application. The antenna does not use any junction to prevent RF inter-modulation and is completely protected within a high-tech ruggedized fiber glass radome to ensure survivability in the worst environments. The compact size of transponder antenna allows easy handling and shipping.

Constructions: Antenna radiator is mechanically captivated and is machined from solid brass for impact resistance. Contact points are made from beryllium copper with gold finish. Metallic parts are plated with bright chromium for corrosion protection. A single 0.625” (16mm) diameter hole is required to mount the antenna. This transponder antenna is a center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special top loaded quarter wave stub monopole matching is used for smooth VSWR and constant gain over the entire frequency band. The antenna termination is enclosed at bottom of the antenna for complete weather protection.

Electrical Specifications:
Frequency Range 1030-1090 MHz
Gain 2.14 dBi.
Bandwidth Entire Band
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omnidirectional
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 1000 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Chromium Plated Brass
Wind Rating 300 Knots TAS
Overall Length 100 mm
Shipping Length 120 mm
Radome Material UV Resistant ABS
Radome Outer Diameter 19 mm
Radome Length 75 mm
Gross Weight 300 Grams

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 100% RH