NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-1117-9
Model AH-1117-9 1100-1700MHz 9 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-1117-9 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-1117-9 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna over 360 Degrees in Azimuth direction and 90 degrees in elevation.

Constructions: The AH-1117-9, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-1117-9 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power splitter/combiner cable harness.

Electrical Specifications:
Frequency Range 1100-1700 MHz
Gain 9 dBic
Bandwidth 1.1 - 1.7 GHz.
Antenna Type Helix
Polarization Circular - RHCP or LHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 65+/-5 Degrees Typical
Front to Back Ratio 16+/-2 dB Typical
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 250 Watts *500W Optional
Input Termination N-Female *DIN-F with 500W

Mechanical Specifications:
Antenna Materials Aluminum, Fiber Glass & SS
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 450 mm
Shipping Length 550 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Length 400 mm
Gross Weight 2 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 30 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-1117-9 1100-1700MHz 9 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-1117-9 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-1117-9 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna over 360 Degrees in Azimuth direction and 90 degrees in elevation.

Constructions: The AH-1117-9, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-1117-9 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power splitter/combiner cable harness.

Electrical Specifications:
Frequency Range 1100-1700 MHz
Gain 9 dBic
Bandwidth 1.1 - 1.7 GHz.
Antenna Type Helix
Polarization Circular - RHCP or LHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 65+/-5 Degrees Typical
Front to Back Ratio 16+/-2 dB Typical
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 250 Watts *500W Optional
Input Termination N-Female *DIN-F with 500W

Mechanical Specifications:
Antenna Materials Aluminum, Fiber Glass & SS
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 450 mm
Shipping Length 550 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Length 400 mm
Gross Weight 2 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 30 to +80 Degrees Celsius
Humidity 0 to 95% RH