NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-1417-16
Model AH-1417-16 1400-1700MHz 16 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-1417-16 uses extended stubs to provide the greater gain while maintaining the wider beam-width and designed to provide wide-band directional transmission/reception of radio signals from 1400-1700 MHz band. This low-profile antennas use Circular Polarization Antenna Technology (LHCP or RHCP) - which delivers better penetration through obstruction and interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-1417-16 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna over 360 Degrees in Azimuth direction and 90 degrees in elevation.

Constructions:The AH-1417-16, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multi-path interference. The AH-1417-16 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with ABS radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance. For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power spltter/combiner cable harness.

Electrical Specifications:
Frequency Range 1400-1700 MHz
Gain 16 dBic
Bandwidth 1.4-1.7 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 30+/-2 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then < 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminium, Copper & ABS
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 900 mm
Shipping Length 1100 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-51 mm (1.5-2 Inches)
Radome Material High Strength ABS
Gross Weight < 2.5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-1417-16 1400-1700MHz 16 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-1417-16 uses extended stubs to provide the greater gain while maintaining the wider beam-width and designed to provide wide-band directional transmission/reception of radio signals from 1400-1700 MHz band. This low-profile antennas use Circular Polarization Antenna Technology (LHCP or RHCP) - which delivers better penetration through obstruction and interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-1417-16 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna over 360 Degrees in Azimuth direction and 90 degrees in elevation.

Constructions:The AH-1417-16, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multi-path interference. The AH-1417-16 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with ABS radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance. For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power spltter/combiner cable harness.

Electrical Specifications:
Frequency Range 1400-1700 MHz
Gain 16 dBic
Bandwidth 1.4-1.7 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 30+/-2 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then < 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminium, Copper & ABS
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 900 mm
Shipping Length 1100 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-51 mm (1.5-2 Inches)
Radome Material High Strength ABS
Gross Weight < 2.5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH