NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-4060-16
Model AH-4060-16 4000-6000MHz 16 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-4060-16 uses extended stubs to provide the greater gain while maintaining the wider beam-width and designed to provide wideband directional transmission/reception of radio signals from 4000-6000 MHz bands including. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. The AH-4060-16 helical antenna is highly suitable to provide the uninterrupted communications in the tunnels. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-4060-16 Helical Antenna is supplied with a specially designed mounting arrangement to hold the antenna at back end by using stainless steel mounting brackets to withstand the higher wind rating. The AH-4060-16 helical antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, 360 degrees in Azimuth and 90 degrees in Elevation for terrestrial and satellite link. Both LHCP and RHCP models are available. The part number for LHCP version is AH-4060-16-LHCP and AH-4060-16-RHCP is for RHCP version.
Constructions: The AH-4060-16, like all our AH series helical antennas, utilizes right hand circular polarization to minimize the effects of multipath interference. The AH-4060-16 Helical Antenna is heavy duty, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. The radiating element of high power helical antenna is made of high quality high strength enameled coated copper wire and winding is secure alongside wall of fiber glass enclosure to keep the helical winding/radiating element to its appropriate location to prevent RF inter-modulation.

Electrical Specifications:
Frequency Range 4000-6000 MHz
Gain 16 dBic
Bandwidth 4-6 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 25+/-5 Degrees - Azimuth
Front to Back Ratio 17 dB.
VSWR - Equal To or Better Then < 2:1
RF Power Handling Capacity 50 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminium, Copper & ABS
Mounting Hardware -Materials Stainless Steel
Overall Length 280 mm
Shipping Length 300 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-51 mm (1.5-2 Inches)
Radome Material High Strength ABS
Radome Length 200 mm
Gross Weight < 1.5 Kg.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-4060-16 4000-6000MHz 16 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-4060-16 uses extended stubs to provide the greater gain while maintaining the wider beam-width and designed to provide wideband directional transmission/reception of radio signals from 4000-6000 MHz bands including. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. The AH-4060-16 helical antenna is highly suitable to provide the uninterrupted communications in the tunnels. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-4060-16 Helical Antenna is supplied with a specially designed mounting arrangement to hold the antenna at back end by using stainless steel mounting brackets to withstand the higher wind rating. The AH-4060-16 helical antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, 360 degrees in Azimuth and 90 degrees in Elevation for terrestrial and satellite link. Both LHCP and RHCP models are available. The part number for LHCP version is AH-4060-16-LHCP and AH-4060-16-RHCP is for RHCP version.
Constructions: The AH-4060-16, like all our AH series helical antennas, utilizes right hand circular polarization to minimize the effects of multipath interference. The AH-4060-16 Helical Antenna is heavy duty, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. The radiating element of high power helical antenna is made of high quality high strength enameled coated copper wire and winding is secure alongside wall of fiber glass enclosure to keep the helical winding/radiating element to its appropriate location to prevent RF inter-modulation.

Electrical Specifications:
Frequency Range 4000-6000 MHz
Gain 16 dBic
Bandwidth 4-6 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 25+/-5 Degrees - Azimuth
Front to Back Ratio 17 dB.
VSWR - Equal To or Better Then < 2:1
RF Power Handling Capacity 50 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials Aluminium, Copper & ABS
Mounting Hardware -Materials Stainless Steel
Overall Length 280 mm
Shipping Length 300 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-51 mm (1.5-2 Inches)
Radome Material High Strength ABS
Radome Length 200 mm
Gross Weight < 1.5 Kg.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH