NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-5458
Model AH-5458 5400-5800MHz 18 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-5458 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-5458 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-5458, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-5458 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

Electrical Specifications:
Frequency Range 5400 - 5800 MHz
Gain 18 dBic
Bandwidth 5.4 - 5.8 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 30 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminium, Copper, ABS
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 280 mm
Shipping Length 350 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-52mm (1.5-2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 45 mm
Gross Weight 1 Kg.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-5458 5400-5800MHz 18 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-5458 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-5458 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-5458, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-5458 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

Electrical Specifications:
Frequency Range 5400 - 5800 MHz
Gain 18 dBic
Bandwidth 5.4 - 5.8 GHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 30 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then 1.5:1
RF Power Handling Capacity 150 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminium, Copper, ABS
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 280 mm
Shipping Length 350 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 38-52mm (1.5-2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 45 mm
Gross Weight 1 Kg.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH