NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-600
Model AH-600 500-700 MHz 12 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-600 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-600 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-600, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-600 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power splitter/combiner cable harness.

Electrical Specifications:
Frequency Range 500-700 MHz
Gain 12 dBic
Bandwidth 500-700MHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 40 Degrees Typical
Front to Back Ratio 15 dB Typical
VSWR - Equal To or Better Then Better than 1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials High Quality Copper, Aluminum & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 190 Km/Hr.
Overall Length 1.1 Meters
Shipping Length 1.2 Meters
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 51 mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 150 mm
Radome Length 1000 mm
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-600 500-700 MHz 12 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-600 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-600 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-600, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-600 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power splitter/combiner cable harness.

Electrical Specifications:
Frequency Range 500-700 MHz
Gain 12 dBic
Bandwidth 500-700MHz
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 40 Degrees Typical
Front to Back Ratio 15 dB Typical
VSWR - Equal To or Better Then Better than 1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials High Quality Copper, Aluminum & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 190 Km/Hr.
Overall Length 1.1 Meters
Shipping Length 1.2 Meters
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 51 mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 150 mm
Radome Length 1000 mm
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH