NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
SD6-75
Model SD6-75 66 - 88 MHz 6 dBd. Gain Download Datasheet Download Manual Post Enquiry

High Gain Stacked DipoleArray

Design Features: The SD6-75 high performance VHF stacked dipole array is designed for use with highly populated radio sites requiring long haul omni-directional coverage. The SD6-75 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni directional characteristics. This stacked dipole array is highly suitable as base station antennas for Repeater and Paging sites.
Constructions: The SD6-75 Stacked Dipole Array consists of four folded dipoles stacked vertically, fed in phase. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. Termination of phasing harness cable sealed by heat shrinking tube making stacked dipole antenna waterproofing. The 12 Meters long central mast for mounting the dipoles is shipped in four sections of 3 Meters each for easy of shipping. The stacked dipole antenna is suitable for side mounting on the tower and is supplied with mounting hardware of 1.35 Meters (4.5 feet) long two horizontal arms to hold the antenna on the side of the antenna tower.
Radiation Pattern: When the FOUR dipoles are arranged 90 degrees apart around the central mast, 6dBd. omni directional radiation pattern results. Aligning the FOUR dipoles collinearly (facing in one direction) a 9dBd. offset radiation pattern is obtained. The radiation pattern can be changed in the field by use of common hand tools.

Electrical Specifications:
Frequency Range 66 - 88 MHz
Gain 6 dBd.
Bandwidth 6 MHz.
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
Horizontal Beamwidth -Half Power Points 18 Degrees
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 Km/Hr
Overall Length 12 Meters
Shipping Length 3 Meters
Support Pipe Material Aluminum 51mm OD
Maximum Mount Pipe Diameter 51 mm (2 Inches)
Gross Weight 45 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to 70 Degrees Celsius
Storage Temperature (-)40 to 80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Stacked DipoleArray

Model Frequency Gain Download PDF ENQ
SD6-75 66 - 88 MHz 6 dBd. Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The SD6-75 high performance VHF stacked dipole array is designed for use with highly populated radio sites requiring long haul omni-directional coverage. The SD6-75 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni directional characteristics. This stacked dipole array is highly suitable as base station antennas for Repeater and Paging sites.
Constructions: The SD6-75 Stacked Dipole Array consists of four folded dipoles stacked vertically, fed in phase. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. Termination of phasing harness cable sealed by heat shrinking tube making stacked dipole antenna waterproofing. The 12 Meters long central mast for mounting the dipoles is shipped in four sections of 3 Meters each for easy of shipping. The stacked dipole antenna is suitable for side mounting on the tower and is supplied with mounting hardware of 1.35 Meters (4.5 feet) long two horizontal arms to hold the antenna on the side of the antenna tower.
Radiation Pattern: When the FOUR dipoles are arranged 90 degrees apart around the central mast, 6dBd. omni directional radiation pattern results. Aligning the FOUR dipoles collinearly (facing in one direction) a 9dBd. offset radiation pattern is obtained. The radiation pattern can be changed in the field by use of common hand tools.

Electrical Specifications:
Frequency Range 66 - 88 MHz
Gain 6 dBd.
Bandwidth 6 MHz.
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
Horizontal Beamwidth -Half Power Points 18 Degrees
VSWR - Equal To or Better Then 1:1.5
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 Km/Hr
Overall Length 12 Meters
Shipping Length 3 Meters
Support Pipe Material Aluminum 51mm OD
Maximum Mount Pipe Diameter 51 mm (2 Inches)
Gross Weight 45 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to 70 Degrees Celsius
Storage Temperature (-)40 to 80 Degrees Celsius
Humidity 0 to 95% RH