NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
SD9-150

SD9-150

  2. High Gain Stacked Dipole Array
  3. SD9-150
Model SD9-150 406 – 512 MHz. 9 dBd. Gain Download Datasheet Download Manual Post Enquiry

High Gain Stacked DipoleArray

Design Features: The SD9-450 high performance UHF stacked dipole array is designed for use with highly populated radio sites requiring long haul omni directional coverage. The SD9-450 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni directional characteristics. This stacked dipole array is highly suitable as base station antennas for Repeater and Paging sites.

Constructions: The SD9-450 Stacked Dipole Array consists of eight folded dipoles stacked vertically. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. N-Female connector of phasing harness cable sealed in heat shrinking tube making stacked dipole antenna waterproofing. The 6 Meters long central mast for mounting the dipoles, shipped in two sections of 3 Meters each.

Electrical Specifications:
Frequency Range 406 - 512 MHz.
Gain 9 dBd.
Bandwidth 25 MHz.
Polarization Vertical
Input Impedance 50 Ohms.
Radiation Pattern Omni Directional
VSWR - Equal To or Better Then 1.5 : 1
RF Power Handling Capacity 250 Watts.
Input Termination N-Female

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 16 Kgs.
Wind Rating 200 Km/Hr.
Mounting Type Top Mounting
Overall Length 6 Meters.
Support Pipe Aluminum - Outer Diameter. 51 mm
Dipoles Aluminum - O.D. 12.7 mm
Shipping Length 3 Meters
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Stacked DipoleArray

Model Frequency Gain Download PDF ENQ
SD9-150 406 – 512 MHz. 9 dBd. Gain
 
Back
MANDATORY INFORMATION
Optional INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The SD9-450 high performance UHF stacked dipole array is designed for use with highly populated radio sites requiring long haul omni directional coverage. The SD9-450 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni directional characteristics. This stacked dipole array is highly suitable as base station antennas for Repeater and Paging sites.

Constructions: The SD9-450 Stacked Dipole Array consists of eight folded dipoles stacked vertically. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. N-Female connector of phasing harness cable sealed in heat shrinking tube making stacked dipole antenna waterproofing. The 6 Meters long central mast for mounting the dipoles, shipped in two sections of 3 Meters each.

Electrical Specifications:
Frequency Range 406 - 512 MHz.
Gain 9 dBd.
Bandwidth 25 MHz.
Polarization Vertical
Input Impedance 50 Ohms.
Radiation Pattern Omni Directional
VSWR - Equal To or Better Then 1.5 : 1
RF Power Handling Capacity 250 Watts.
Input Termination N-Female

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Weight 16 Kgs.
Wind Rating 200 Km/Hr.
Mounting Type Top Mounting
Overall Length 6 Meters.
Support Pipe Aluminum - Outer Diameter. 51 mm
Dipoles Aluminum - O.D. 12.7 mm
Shipping Length 3 Meters
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH