NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
LP-100-1000
Model LP-100-1000 100-1000MHz 9 dBi Gain Download Datasheet Download Manual Post Enquiry

Military Log Periodic DipoleAntenna

Design Features: The LP-100-1000 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 100-1000 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, surveillance, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 100-1000 MHz as the LPDA does not use loading technique to reduce the overall size of array. The high gain log periodic antenna can be assembled in less than 5 minutes by 2 technicians. Antenna is supplied with rear end mounting. The antenna can also be supplied with mounting at center of gravity on request.

Constructions:The LP-100-1000 assembled log periodic antennas outer-most dimensions are 1.8 meters (71 Inches) long and 1.5 meters (60 Inches) wide. The antenna has foldable elements, the longest of which is 0.75 meter. All the elements are supplied in two segments for easy of shipping and handling. The elements are attached via a stainless steel stud system which is fixed at each element end for attaching the same on the corresponding marked position on support boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The complete antenna is supplied with epoxy based powder coating finish to protect it further from severe environmental conditions All the screws, nuts and bolts of high gain log periodic dipole antenna are made of type 316 marine grade stainless steel. The LP Antenna is supplied with olive green military colour finish. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range 100-1000MHz
Gain 9 dBi
Bandwidth 100-1000MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 90 +/-10 Degrees Typical
Vertical Beamwidth -Half Power Points 65 +/-10 Degrees Typical
Front to Back Ratio 18 +/-2 dB. Typical
VSWR - Equal To or Better Then 2.5:1
RF Power Handling Capacity 250 Watts CW
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 1.8 Meters (71 Inches)
Shipping Length 1.9 Meters (75 Inches)
Support Boom -
Material - O.D.
6063T6 Aluminum Alloy
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
6063T6 Aluminum Alloy
Round Tube
Mounting Clamps Position At Rear End of Boom
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Military Log Periodic DipoleAntenna

Model Frequency Gain Download PDF ENQ
LP-100-1000 100-1000MHz 9 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The LP-100-1000 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 100-1000 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, surveillance, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 100-1000 MHz as the LPDA does not use loading technique to reduce the overall size of array. The high gain log periodic antenna can be assembled in less than 5 minutes by 2 technicians. Antenna is supplied with rear end mounting. The antenna can also be supplied with mounting at center of gravity on request.

Constructions:The LP-100-1000 assembled log periodic antennas outer-most dimensions are 1.8 meters (71 Inches) long and 1.5 meters (60 Inches) wide. The antenna has foldable elements, the longest of which is 0.75 meter. All the elements are supplied in two segments for easy of shipping and handling. The elements are attached via a stainless steel stud system which is fixed at each element end for attaching the same on the corresponding marked position on support boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The complete antenna is supplied with epoxy based powder coating finish to protect it further from severe environmental conditions All the screws, nuts and bolts of high gain log periodic dipole antenna are made of type 316 marine grade stainless steel. The LP Antenna is supplied with olive green military colour finish. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range 100-1000MHz
Gain 9 dBi
Bandwidth 100-1000MHz
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 90 +/-10 Degrees Typical
Vertical Beamwidth -Half Power Points 65 +/-10 Degrees Typical
Front to Back Ratio 18 +/-2 dB. Typical
VSWR - Equal To or Better Then 2.5:1
RF Power Handling Capacity 250 Watts CW
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 1.8 Meters (71 Inches)
Shipping Length 1.9 Meters (75 Inches)
Support Boom -
Material - O.D.
6063T6 Aluminum Alloy
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
6063T6 Aluminum Alloy
Round Tube
Mounting Clamps Position At Rear End of Boom
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Gross Weight 5 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH