NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
LP-1200-1600
Model LP-1200-1600 1200-1600MHz 11 dBi Gain Download Datasheet Download Manual Post Enquiry

Military Log Periodic DipoleAntenna

Design Features: The LP-1200-1600 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 1200 to 1600MHz bands including GPS L1 and GPS L2 bands. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. The log periodic dipole antenna is supplied complete in assembled condition. This high gain LPA provides strong performance over the entire frequency of 1200-1600MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.

Constructions:The high gain log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. The LP-1200-1600 assembled log periodic antennas outer-most dimensions are 0.45 meter (18 Inches) long and 0.13 meter (5 Inches) wide. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range 1200-1600 MHz
Gain 11 dBi
Bandwidth Entire Band
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 50+/-5 Degrees Typical
Front to Back Ratio 19 dB.
VSWR - Equal To or Better Then Less Than 2:1
RF Power Handling Capacity 100 watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 450 mm
Shipping Length 500 mm
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Rod
Insulator Material Teflon
Maximum Mount Pipe Diameter 30-52 mm (2 Inches)
Gross Weight 2 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Military Log Periodic DipoleAntenna

Model Frequency Gain Download PDF ENQ
LP-1200-1600 1200-1600MHz 11 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The LP-1200-1600 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 1200 to 1600MHz bands including GPS L1 and GPS L2 bands. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. The log periodic dipole antenna is supplied complete in assembled condition. This high gain LPA provides strong performance over the entire frequency of 1200-1600MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.

Constructions:The high gain log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. The LP-1200-1600 assembled log periodic antennas outer-most dimensions are 0.45 meter (18 Inches) long and 0.13 meter (5 Inches) wide. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range 1200-1600 MHz
Gain 11 dBi
Bandwidth Entire Band
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 50+/-5 Degrees Typical
Front to Back Ratio 19 dB.
VSWR - Equal To or Better Then Less Than 2:1
RF Power Handling Capacity 100 watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Overall Length 450 mm
Shipping Length 500 mm
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Rod
Insulator Material Teflon
Maximum Mount Pipe Diameter 30-52 mm (2 Inches)
Gross Weight 2 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH