NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
LP-500-2000
Model LP-500-2000 500-2000 MHz 9 dBi Gain Download Datasheet Download Manual Post Enquiry

Military Log Periodic DipoleAntenna

Design Features:The LP-500-2000 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 500 to 2000 MHz bands. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This high gain LPA provides strong performance over the entire frequency of 500-2500 MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions: The log periodic dipole antenna is supplied complete in assembled condition. The LP-500-2000 assembled log periodic antennas outer-most dimensions are 0.65 meter (2.1 feet) long and 0.3 meter (1 foot) wide. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range 500-2000 MHz
Gain 9 dBi
Bandwidth Entire Band
Polarization Horizontal or Vertical
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 65 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then <1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 KMPH
Overall Length 650MM
Shipping Length 750MM
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Rod
Insulator Material Teflon & Delrin
Maximum Mount Pipe Diameter 51mm (2 Inches)
Gross Weight 3.5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Military Log Periodic DipoleAntenna

Model Frequency Gain Download PDF ENQ
LP-500-2000 500-2000 MHz 9 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features:The LP-500-2000 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 500 to 2000 MHz bands. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This high gain LPA provides strong performance over the entire frequency of 500-2500 MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions: The log periodic dipole antenna is supplied complete in assembled condition. The LP-500-2000 assembled log periodic antennas outer-most dimensions are 0.65 meter (2.1 feet) long and 0.3 meter (1 foot) wide. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range 500-2000 MHz
Gain 9 dBi
Bandwidth Entire Band
Polarization Horizontal or Vertical
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 65 Degrees
Front to Back Ratio 18 dB.
VSWR - Equal To or Better Then <1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials All Aluminum
Mounting Hardware -Materials Stainless Steel
Wind Rating 200 KMPH
Overall Length 650MM
Shipping Length 750MM
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Rod
Insulator Material Teflon & Delrin
Maximum Mount Pipe Diameter 51mm (2 Inches)
Gross Weight 3.5 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH