NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
SC-243-318
Model SC-243-318 243-318MHz 1 dBi Gain Download Datasheet Download Manual Post Enquiry

SATCOM Ground Station Antenna

Design Features The SC-243-318 Satcom Collinear Antenna is rugged all weather model, enclosed in a ABS enclosure, uses high class aluminum alloy support pipe and does not require any field tuning or adjustments. This SATCOM collinear antenna can be mounted on the roof-top hole of the vehicle or directly onto the equipments. The SC-243-318 antenna is highly suitable for man-pack and vehicle mounting applications. Similarly the antenna can also be supplied with pole mounting hardware (optional).

Constructions The special co-axial stub and spark gap techniques are used for smooth VSWR and constant Gain over entire the 243-318 MHz frequency band. The SC-243-318 satcom collinear antenna consists of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in ABS housing. The ABS has excellent transparency for Radio Signal and mechanically Robust to support extra mechanical strength to the satcom collinear antenna. The antenna supplied with olive green colour for defense application.

Electrical Specifications:
Frequency Range 243-318 MHz
Gain 1 dBi
Bandwidth 243-318 MHz
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1:2.5
RF Power Handling Capacity 200 Watts
Input Termination N-Female

Mechanical Specifications:
Mounting Hardware -Materials Stainless Steel
Wind Rating 190 KMPH
Overall Length 330 mm
Shipping Length 350 mm
Support Pipe Material Aluminum
Radiating Material High Quality Brass
Radome Material ABS
Radome Outer Diameter 32 mm
Net Weight 0.5 Kg.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

SATCOM Ground Station Antenna

Model Frequency Gain Download PDF ENQ
SC-243-318 243-318MHz 1 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features The SC-243-318 Satcom Collinear Antenna is rugged all weather model, enclosed in a ABS enclosure, uses high class aluminum alloy support pipe and does not require any field tuning or adjustments. This SATCOM collinear antenna can be mounted on the roof-top hole of the vehicle or directly onto the equipments. The SC-243-318 antenna is highly suitable for man-pack and vehicle mounting applications. Similarly the antenna can also be supplied with pole mounting hardware (optional).

Constructions The special co-axial stub and spark gap techniques are used for smooth VSWR and constant Gain over entire the 243-318 MHz frequency band. The SC-243-318 satcom collinear antenna consists of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in ABS housing. The ABS has excellent transparency for Radio Signal and mechanically Robust to support extra mechanical strength to the satcom collinear antenna. The antenna supplied with olive green colour for defense application.

Electrical Specifications:
Frequency Range 243-318 MHz
Gain 1 dBi
Bandwidth 243-318 MHz
Polarization Vertical
Input Impedance 50 Ohms
Radiation Pattern Omni-directional
VSWR - Equal To or Better Then 1:2.5
RF Power Handling Capacity 200 Watts
Input Termination N-Female

Mechanical Specifications:
Mounting Hardware -Materials Stainless Steel
Wind Rating 190 KMPH
Overall Length 330 mm
Shipping Length 350 mm
Support Pipe Material Aluminum
Radiating Material High Quality Brass
Radome Material ABS
Radome Outer Diameter 32 mm
Net Weight 0.5 Kg.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH