NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
APT-1327-4
Model APT-1327-4 1350-2700MHz 21-27 dBi Gain Download Datasheet Download Manual Post Enquiry

Tactical Radio Relay Antenna

Design Features: The APT-1327-4 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.2 Meters (4 feet) for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band III+ frequency band, operates in linear polarization and requires one operator only for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-1327-4 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna.

Constructions:The APT-1327-4 tactical microwave antenna operates in the 1350-2700MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed horn which is fitted to the center of assembly with quick fastener system. Radiating elements and the dipole feed are made of high quality brass. All the screws, nuts and bolts of tactical microwave antenna are of stainless steel. The antenna supplied with army green color. The complete antenna is supplied with anti-corrosive powder coating finish and the dipole feed is completely sealed inside ABS housing/radome.

Electrical Specifications:
Frequency Range 1350-2700 MHz
Gain 21-27 dBi
Bandwidth NATO Band III+
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Horizontal Beamwidth -Half Power Points 13/9/6 Degrees
Front to Back Ratio 30 dB.
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Diameter of Parabolic Reflector 1.2 Meters (4 feet)
Support & Rim Material Aluminum 25.4mm (1") OD
Grid Members Material Aluminum 12.7mm (1/2") OD
Maximum Mount Pipe Diameter 38-52mm (1.5-2
Radome Material ABS
Radiating Elements - Material High Quality Brass
Gross Weight 12 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Tactical Radio Relay Antenna

Model Frequency Gain Download PDF ENQ
APT-1327-4 1350-2700MHz 21-27 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The APT-1327-4 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.2 Meters (4 feet) for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band III+ frequency band, operates in linear polarization and requires one operator only for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-1327-4 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna.

Constructions:The APT-1327-4 tactical microwave antenna operates in the 1350-2700MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed horn which is fitted to the center of assembly with quick fastener system. Radiating elements and the dipole feed are made of high quality brass. All the screws, nuts and bolts of tactical microwave antenna are of stainless steel. The antenna supplied with army green color. The complete antenna is supplied with anti-corrosive powder coating finish and the dipole feed is completely sealed inside ABS housing/radome.

Electrical Specifications:
Frequency Range 1350-2700 MHz
Gain 21-27 dBi
Bandwidth NATO Band III+
Polarization Vertical or Horizontal
Input Impedance 50 Ohms
Horizontal Beamwidth -Half Power Points 13/9/6 Degrees
Front to Back Ratio 30 dB.
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 500 Watts
Input Termination N-Female
Lightning Protection Direct Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 200 Km/Hr.
Diameter of Parabolic Reflector 1.2 Meters (4 feet)
Support & Rim Material Aluminum 25.4mm (1") OD
Grid Members Material Aluminum 12.7mm (1/2") OD
Maximum Mount Pipe Diameter 38-52mm (1.5-2
Radome Material ABS
Radiating Elements - Material High Quality Brass
Gross Weight 12 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH