NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
APT-1619
Model APT-1619 1350-1850MHz 19 dBi Gain Download Datasheet Download Manual Post Enquiry

Tactical Radio Relay Antenna

Design Features: The APT-1619 tactical microwave grid parabolic antenna uses 6063T6 ultra corrossion resistant architectural anodized aluminum alloy. It consists of full Parabolic reflector having a diameter of 0.9 Meter for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full band III, operates in linear polarization and requires only one operator for installation. The antenna features a rare combination of high gain, low side lobes and a rugged construction. APT-1619 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna.

Design Features: Radiating elements and the dipole feed are made high quality aluminum alloy to avoid any dissimilar materials. The rim and supporting arc are welded with argon welding technique to provide smooth finish and strong joints. The APT-1619 tactical microwave antenna operates in the 1350-1850MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed which is fitted to the center of assembly with quick fastener system. Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical microwave antenna are of stainless steel. The antenna supplied with army green color IR NATO 24X5.

Electrical Specifications:
Frequency Range 1350 - 1850 MHz.
Gain 19 dBi
Bandwidth Entire Band III
Polarization Linear - Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 14 dB. @ Center Frequency
Front to Back Ratio 20 dB.
VSWR - Equal To or Better Then 1:2
RF Power Handling Capacity 250 Watts
Input Termination N-Female
Lightning Protection DC Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 180 Km/Hr.
Diameter of Parabolic Reflector 0.9 Meter
Radiating Material Aluminum Alloy
Reflector Grid Material Aluminum Tube 1/2 Inch
Support & Rim Material Alumiinuum Tube 1 inch
Maximum Mount Pipe Diameter 52mm (2 Inches)
Gross Weight 9 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Tactical Radio Relay Antenna

Model Frequency Gain Download PDF ENQ
APT-1619 1350-1850MHz 19 dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The APT-1619 tactical microwave grid parabolic antenna uses 6063T6 ultra corrossion resistant architectural anodized aluminum alloy. It consists of full Parabolic reflector having a diameter of 0.9 Meter for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full band III, operates in linear polarization and requires only one operator for installation. The antenna features a rare combination of high gain, low side lobes and a rugged construction. APT-1619 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna.

Design Features: Radiating elements and the dipole feed are made high quality aluminum alloy to avoid any dissimilar materials. The rim and supporting arc are welded with argon welding technique to provide smooth finish and strong joints. The APT-1619 tactical microwave antenna operates in the 1350-1850MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed which is fitted to the center of assembly with quick fastener system. Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical microwave antenna are of stainless steel. The antenna supplied with army green color IR NATO 24X5.

Electrical Specifications:
Frequency Range 1350 - 1850 MHz.
Gain 19 dBi
Bandwidth Entire Band III
Polarization Linear - Vertical or Horizontal
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 14 dB. @ Center Frequency
Front to Back Ratio 20 dB.
VSWR - Equal To or Better Then 1:2
RF Power Handling Capacity 250 Watts
Input Termination N-Female
Lightning Protection DC Ground

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 180 Km/Hr.
Diameter of Parabolic Reflector 0.9 Meter
Radiating Material Aluminum Alloy
Reflector Grid Material Aluminum Tube 1/2 Inch
Support & Rim Material Alumiinuum Tube 1 inch
Maximum Mount Pipe Diameter 52mm (2 Inches)
Gross Weight 9 Kgs.

Environmental Specifications:
Operating Temperature (-)30 to +70 Degrees Celsius
Storage Temperature (-)40 to +80 Degrees Celsius
Humidity 0 to 95% RH