NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
APT-4734
Model APT-4734 4400-5000MHz 33.5dBi Gain Download Datasheet Download Manual Post Enquiry

Tactical Radio Relay Antenna

Design Features:The APT-4734 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.6 Meters for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band IV, operates in linear polarization and requires two operators for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-4734 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna. The antenna is supplied with +/-5 degrees elevation tracking mechanism.

Constructions: The APT-4734 uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and supplied with powder coating finish in order to prevent it further from sever environmental condition. The tactical microwave antenna operates in the 4400-5000MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed which is fitted to the center of assembly with quick fastener system. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical microwave antenna are of marine grade stainless steel. The antenna supplied with olive army green color.

Electrical Specifications:
Frequency Range 4400-5000 MHz
Gain 33.5dBi
Bandwidth NATO Band IV
Polarization Horizontal or Vertical
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 3 Degrees
Front to Back Ratio 32 dB.
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 100 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 160 Km/Hr.
Diameter of Parabolic Reflector 1.6 Meters (5.3 feet)
Radiating Material High Quality Brass
Reflector Grid Material Aluminum Tube 12.7mm
Support & Rim Material Aluminum Tube 25.4mm
Maximum Mount Pipe Diameter 38-60 mm (1.5-2.25Inches)
Gross Weight 22 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

Tactical Radio Relay Antenna

Model Frequency Gain Download PDF ENQ
APT-4734 4400-5000MHz 33.5dBi Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features:The APT-4734 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.6 Meters for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band IV, operates in linear polarization and requires two operators for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-4734 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna. The antenna is supplied with +/-5 degrees elevation tracking mechanism.

Constructions: The APT-4734 uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and supplied with powder coating finish in order to prevent it further from sever environmental condition. The tactical microwave antenna operates in the 4400-5000MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed which is fitted to the center of assembly with quick fastener system. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical microwave antenna are of marine grade stainless steel. The antenna supplied with olive army green color.

Electrical Specifications:
Frequency Range 4400-5000 MHz
Gain 33.5dBi
Bandwidth NATO Band IV
Polarization Horizontal or Vertical
Input Impedance 50 Ohms
Radiation Pattern Directional
Horizontal Beamwidth -Half Power Points 3 Degrees
Front to Back Ratio 32 dB.
VSWR - Equal To or Better Then 2:1
RF Power Handling Capacity 100 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials 6063T6 Aluminum Alloy
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 160 Km/Hr.
Diameter of Parabolic Reflector 1.6 Meters (5.3 feet)
Radiating Material High Quality Brass
Reflector Grid Material Aluminum Tube 12.7mm
Support & Rim Material Aluminum Tube 25.4mm
Maximum Mount Pipe Diameter 38-60 mm (1.5-2.25Inches)
Gross Weight 22 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH