- NATO NCAGE Code Holder Company
- ISO 9001:2015 (QUALITY CERTIFIED FIRM)
- ISO 18001:2015 (SAFETY CERTIFIED FIRM)
- ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AWD-30-1000
- Mast & Accessories
- Antenna
- Military Log Periodic Dipole Antenna
- Military Discone Antenna
- Dual Polarized Log Periodic Antenna
- High Gain TETRA Antenna
- High Gain ATC Antenna
- Military Surveillance Antenna
- Signal Intelligence Antenna
- Electronic Warfare Antenna
- Military Tactical Antenna
- UAV Anti Drone Antenna
- High Gain Helical Antenna
- Quadrifilar Helix Antenna
- Cavity Backed Dual Arm Spiral Antenna
- Fiber Glass Collinear Antenna
- High Power RCIED Jammer Antenna
- FTS Antenna
- ILS Antenna
- High Gain DME Antenna
- High Gain ADS-B Antenna
- Military Manpack Jammer Antenna
- High Gain Log Periodic Antenna
- Wide Band Discone Antenna
- Naval Shipboard Antenna
- High Gain Marine Antenna
- SATCOM Ground Station Antenna
- HF Broadband Military Antenna
- HF Broadband Conical Monopole Antenna
- Grid Parabolic Antenna
- Tactical Radio Relay Antenna
- Military Vehicle Mount Antenna
- Military Coaxial Dipole Antenna
- Military Multi Band Antenna
- High Gain Horn Antenna
- High Gain Stacked Dipole Array
- Wind Profiler Radar Antenna
- Ground To Air Antenna
- GPS Jammer Anti-Jam Antenna
- UHF Military SATCOM Antenna
- Glide Slope Glide Path Antenna
- Military Ground Plane Antenna
- FM Broadcast Antenna
- High Gain Yagi Antenna
- High Gain Dual Stacked Yagi Antenna
- High Gain Quad Stacked Yagi Antenna
- High Gain Circular Polarized Yagi Antenna
- Dual Stacked Circular Yagi Antenna
- Quad Stacked Circular Yagi Antenna
- Side Mount Dipole
- Tech Support
- Policies
- Knowledgebase
- About Us
Wide Band Discone Antenna |
|||||||||||||||||||||||||||||||||||||||||||||||||
Design Features: AWD-30-1000 discone antenna is specially designed for Omni directional coverage. Due to it’s low VSWR through entire band from 30-1000 MHz., this discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or Jamming application. The Discone antenna when packed, comes with Cone and Disc elements removed from the antenna body for ease of packing and shipment.
|
Wide Band Discone Antenna
Model | Frequency | Gain | Download | ENQ | |
---|---|---|---|---|---|
AWD-30-1000 | 30-1000MHz | 2.15 dBi Gain |
Design Features: AWD-30-1000 discone antenna is specially designed for Omni directional coverage. Due to it’s low VSWR through entire band from 30-1000 MHz., this discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or Jamming application. The Discone antenna when packed, comes with Cone and Disc elements removed from the antenna body for ease of packing and shipment.
Construction: AWD-30-1000 wideband discone antenna is rugged all weather model, does not require any field tuning or adjustments. The compact size of discone antenna allows easy handling and specially designed mounting hardware results in fast installation. The cone and disc hubs of wide band discone antennas are made of high quality aluminum and all fasteners are of marine grade stainless steel. Discone Antenna termination and feed cable lie enclosed inside the mounting pipe for complete weather protection. The antenna is supplied with powder coating finish to protect it further from sever environmental conditions.
Electrical Specifications: | |
Frequency Range | 30 - 1000 MHz. |
Gain | 2.15 dBi |
Bandwidth | Entire Band |
Polarization | Vertical |
Input Impedance | 50 Ohms. |
Radiation Pattern | Omni Directional |
Beamwidth -3dB. | 78 Degrees (Vertical) |
VSWR - Equal To or Better Then | 1:2.5 |
RF Power Handling Capacity | 500 Watts. |
Input Termination | N-Female |
Mechanical Specifications: | |
Antenna Materials | 6063T6 Aluminum Alloy |
Mounting Hardware -Materials | Marine Grdae Stainless Steel |
Wind Rating | 180 Km/Hr. |
Overall Length | 3 Meters |
Shipping Length | 2.5 Meters. |
Support Pipe Material | Powder Coated Aluminum |
Insulator Material | Teflon & Nylon |
Maximum Mount Pipe Diameter | 52 mm (2 Inches) |
Gross Weight | 25 Kgs. |
Environmental Specifications: | |
Operating Temperature | (-)30 to +70 Degrees Celsius |
Storage Temperature | (-)40 to +80 Degrees Celsius |
Humidity |