NATO NCAGE Code Holder Company | ISO 9001:2015 (QUALITY CERTIFIED FIRM) | ISO 18001:2015 (SAFETY CERTIFIED FIRM) | ISO 14001:2015 (ENVIRONMENT CERTIFIED FIRM)
AH-600D
Model AH-600D 500-700MHz 11.5 dBic Gain Download Datasheet Download Manual Post Enquiry

High Gain Helical Antenna

Design Features: The AH-600D dual stacked helical antenna uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This industrial grade antenna provides superior performance as compare to significantly larger and more complex products. Our AH series helical antennas are smaller than conventional cross elements yagi antenna. The AH-600D Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-600D, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-600D Dual Stacked Helical Antenna is light weight, broadband and rugged helical antennas, supplied complete in assembled condition with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

Beamwidth: If the dual stacked helical antenna installed as per given below configuration, the 60 degrees horizontal and 30 degrees vertical beam-width can be obtained. Similarly the dual array can be stacked horizontally to control the beam-width in horizontal plane without disturbing the vertical beam-width.

Electrical Specifications:
Frequency Range 500-700 MHz
Gain 11.5 dBic
Bandwidth 500-700MHz.
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 60 Degrees Typical
Front to Back Ratio 17 dB Typical
VSWR - Equal To or Better Then Better than 1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials High Quality Copper, Aluminum & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 190 KM/Hr.
Overall Length 650-700 mm
Shipping Length 750 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 51mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 150 mm
Gross Weight 10 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH

High Gain Helical Antenna

Model Frequency Gain Download PDF ENQ
AH-600D 500-700MHz 11.5 dBic Gain
 
Back
MANDATORY INFORMATION
NOTE: Enquiry send from other than official/company domain like gmail, yahoo mail, rediff mail, hotmail etc. account holder went to unmonitored spam folder as per company policy

Design Features: The AH-600D dual stacked helical antenna uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This industrial grade antenna provides superior performance as compare to significantly larger and more complex products. Our AH series helical antennas are smaller than conventional cross elements yagi antenna. The AH-600D Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-600D, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-600D Dual Stacked Helical Antenna is light weight, broadband and rugged helical antennas, supplied complete in assembled condition with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

Beamwidth: If the dual stacked helical antenna installed as per given below configuration, the 60 degrees horizontal and 30 degrees vertical beam-width can be obtained. Similarly the dual array can be stacked horizontally to control the beam-width in horizontal plane without disturbing the vertical beam-width.

Electrical Specifications:
Frequency Range 500-700 MHz
Gain 11.5 dBic
Bandwidth 500-700MHz.
Antenna Type Helix
Polarization Circular - LHCP or RHCP
Input Impedance 50 Ohms
Radiation Pattern Directional
Beamwidth -3dB. 60 Degrees Typical
Front to Back Ratio 17 dB Typical
VSWR - Equal To or Better Then Better than 1:2.0
RF Power Handling Capacity 250 Watts
Input Termination N-Female

Mechanical Specifications:
Antenna Materials High Quality Copper, Aluminum & Fiberglass
Mounting Hardware -Materials Marine Grade Stainless Steel
Wind Rating 190 KM/Hr.
Overall Length 650-700 mm
Shipping Length 750 mm
Radiating Material High Quality Copper
Maximum Mount Pipe Diameter 51mm (2 Inches)
Radome Material High Strength Fiber Glass
Radome Outer Diameter 150 mm
Gross Weight 10 Kgs.

Environmental Specifications:
Operating Temperature (-) 30 to +70 Degrees Celsius
Storage Temperature (-) 40 to +80 Degrees Celsius
Humidity 0 to 95% RH